Teachers
CV portal
Email
ستاد رفاهی اعضای هیات علمی
Staff
اتوماسیون اداری
سامانه اداری - مالی
Students
سامانه آموزشی - پژوهشی
سامانه تغذیه
Faculty of
Mechanic Engineering
منو اصلی
Home
About
History
Faculty members
Achievements
Organization structure
Management
Managerial Board
Staff
Education
Graduate Students’ Affairs
Education Groups
Bylaws
Students/ Cultural
Research
Research Boards
Research Centers
Labs
Libraries
Journals
Contact Us
EN
FA
AR
درباره دانشکده
History
Faculty members
Achievements
Organization structure
Faculty Members
Mohammad Kadivar
Mohammad Kadivar (retired)
(FA Page)
Professor
Room: -
Email:
Articles And Books
Thesis
Articles
،Mohammad Rahim Nami،Mohammad Kadivar ,Optimization of composite sandwich panel against impact using genetic algorithm ,International Journal of Impact Engineering ,vol. 0 ,2010 ,pp. 599-604 ,
،Farid Mehrdad،Mohammad Kadivar ,Continuum mechanics ability to predict the material response at atomic scale ,Computational Materials Science ,vol. 0 ,2010 ,pp. 372-380 ,
Vahid Yavari،Iraj Rajabi، ،Mohammad Kadivar ,On the stress distribution around the hole in mechanically fastened joints ,Mechanics Research Communications ,vol. 0 ,2009 ,pp. 373-380 ,
،Mohammad Kadivar،Khosrow Jafarpur ,A sequence scheme to reduce the residual stresses in welding of circular elements ,Iranian Journal of Science and Technology (Transaction B Technology) ,vol. 0 ,2008 ,pp. 367-383 ,
،Mohammad Kadivar ,3D thermo-visco plastic analysis of thin shells buckling behavior due to welding ,International Journal of Mechanics and Solids ,vol. 0 ,1389 ,pp. 29-45 ,
،Mohammad Kadivar،Khosrow Jafarpur ,Experimental evaluation of the effect of external restraint of buckling behavior of thin welded shells ,Iranian Journal of Science and Technology (Transaction B Technology) ,vol. 0 ,2010 ,pp. 397-413 ,
Mohammad Kadivar،Abdoljavad Jaafarpour ,Effect of external constraint on buckling behavior of welded thin shells ,International Journal of Theoretical and Applied Mechanics ,vol. 0 ,0 ,pp. 0-0 ,
Mohammad Kadivar ,critical speed and limit cycles in the empty Y25-freight truck ,Journal of rail and rapid transit ,vol. 0 ,0 ,pp. 0-0 ,
Mohammad Kadivar ,Dynamics of a wheelset with primary suspension systems of Y25 and BA661 bogies ,Journal of vehicle system dynamics ,vol. 0 ,0 ,pp. 0-0 ,
Mohammad Kadivar ,Effect of suspension system in the lateral stability of railway freight trucks ,Journal of rail and rapid transit ,vol. 0 ,0 ,pp. 0-0 ,
Mohammad Kadivar ,Dynamic behaviour of a beam with non-uniform linear varying cross-section under moving load ,Journal of Mechanical Engineering ,vol. 0 ,0 ,pp. 0-0 ,
Mohammad Kadivar ,Three-Dimensional Solutions for Contact Area in Laminated Composite Pinned Joints with Symmetric and Non-Symmetric Stacking Sequences ,Journal of Applied Sciences ,vol. 0 ,0 ,pp. 0-0 ,
Mohammad Kadivar،Abdoljavad Jaafarpour ,International Journal of Theoretical and Applied Mechanics ,CONTENTS ,vol. 0 ,0 ,pp. 1-0 ,
،Mohammad Kadivar،Khosrow Jafarpur ,A squence scheme to reduce the residual streses in welding of circular elements ,Iranian Journal of Science and Technology (Transaction B Technology) ,vol. 0 ,2008 ,pp. 367-383 ,
،Mohammad Rahim Nami،Mohammad Kadivar ,Optimization of composite sandwich panel against impact using genetic algorith ,International Journal of Impact Engineering ,vol. 0 ,2010 ,pp. 599-604 ,
،Farid Mehrdad،Mohammad Kadivar ,Continuum mechanics ability to predict the material response at atomoc scale ,Computational Materals Science ,vol. 0 ,2010 ,pp. 372-380 ,
Mohammad Rahim Nami،Mohammad Kadivar،Khosrow Jafarpur ,Investigation of the 3D response of thick plates under the multipass welding using Anand's viscoplastic model ,Modarres Technical and Engineering ,vol. 0 ,2006 ,pp. 86-80 ,
،Mohammad Kadivar،Khosrow Jafarpur ,Effect of external constraint on buckling behaviorof welded thin shells ,International Journal of Theoretical and Applied Mechanics ,vol. 0 ,2007 ,pp. 1-14 ,
Seyed Ehsan Habibi،Farid Mehrdad،Mohammad Kadivar،Mojtaba Mahzoon ,A New Extended Continuum Mechanics Formulation for Nano-scale Materials ,Iranian Journal of Science and Technology ,vol. 0 ,2015 ,pp. 1-14 ,
Hamid Sharifi،Mohammad Kadivar ,Double mapping of isoparametric mesh generation ,Computers & Structures ,vol. 0 ,1996 ,pp. 471-477 ,
Fazel Dara،Mohammad Kadivar،Hassan Zohoor،Mohammad Rahim Hematiyan،Farid Mehrdad ,Failure Procedure in Adhesive Composite Joints under Different Types of Loading ,Journal Of Applied And Computational Mechanics ,vol. 0 ,2019 ,pp. 647-651 ,
Fazel Dara،Mohammad Kadivar،Hassan Zohoor،Farid Mehrdad،Mohammad Rahim Hematiyan ,Failure Procedure in Epoxy Adhesive Joining Composite Plates ,Iranian Journal of Science and Technology Transactions of Mechanical Engineering ,vol. 0 ,2021 ,pp. 337-350 ,
Conferences
Ehsan Asadi،Sina Doroudgar،Vahid Yavari،Mohammad Kadivar ,Investigation of stress distribution in multi-fastened joints ,ISME ,
،Iraj Rajabi،Mohammad Kadivar ,The three-dimensional finite element analysis of contact area of symmetric and non-symmetric laminated composite pinned joints ,ISME ,
،Mohammad Kadivar ,The best welding sequence to weld thick circular seams ,ISME ,
، ،Mohammad Kadivar ,Solutions for coupled dynamic behavior of thin vertical cylindrical shells ,ISME ,
Ehsan Selahi،Iraj Rajabi،Mohammad Kadivar ,Spew fillet effects on edge concentration of composite adhesive joints ,ISME ,
،Mohammad Kadivar،Khosrow Jafarpur ,Effect of external Constraint on Buckling Behavior of Welded Thin Shells ,2nd International Congress on Manufacturing Engineering ,
،Mohammad Kadivar ,Coupled acoustic structure vibration analysis of a thin clamped free laminated composite cylindrical storage tank partially filled with water ,ISME ,
hamed zakerhaghighi،Mohammad Rahim Nami،Mohammad Kadivar ,Analysis of delamination growth in composite plates under inplane compressive load by finite element method ,Conference on Applications and Design in Mechanical Engineering ,
Mohammad Rahim Nami،Mohammad Kadivar ,Investigation of buckling distortion in welding of a thin wall aluminum butt joint ,The 14th Annual (international) conference of Mechanical Engineering ISME 2006 ,
Mohammad Rahim Nami،Mohammad Kadivar ,Nonlinear analysis of local buckling in welding of a thin wall aluminum structure ,International conference on modeling and simulation ,
Mohammad Rahim Nami،Mohammad Kadivar ,Global buckling investigation in welding of a thin wall aluminum T joint ,2006 ASME pressure vessels and piping division conference ,
Mohammad Kadivar ,Parametric study of dynamic behavior of a beam under moving load ,14th conference of mechanical engineering ISME2006 ,
Mohammad Kadivar ,Force vibration of uniform strengthened beam under the action of moving load ,7th international congress on civil engineering ICCE 2006 ,
Mohammad Kadivar ,THE THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF CONTACT AREA OF SYMMETRIC AND NON-SYMMETRIC LAMINATED COMPOSITE PINNED-JOINTS ,ISME 2007 ,
Mohammad Kadivar ,SPEW FILLET EFFECTS ON EDGE STRESS CONCENTRATION OF COMPOSITE ADHESIVE JOINTS ,ISME 2007 ,
، ،Mohammad Kadivar ,Effect of composite laminated layup on vibrational behavior of composite pipe containing flowing fluid ,The 2nd International Conference on Composites CCFA-2 ,
Vahid Yavari،Mohammad Kadivar ,FIBER VOLUME FRACTION AROUND STITCH IN NCF COMPOSITES ,EASEC-12 ,
، ،Mohammad Kadivar ,INVESTIGATION ON THE MOTION AND DISCHARGE PROCESSES OF GRANULAR SULPHUR IN STORAGE SILO ,ICMET ,
، ،Mohammad Kadivar ,Effect of Particle Size on the Mechanical Strength of Granular Sulphur at South Pars Gas Complex Phases 2 and 3 ,CMAE ,
maziyar vesal shirazi،Mohammad Kadivar،Vahid Yavari ,The effect of friction on stress distribution around the hole in composite pinned connections ,ICAMMP ,
،Mohammad Kadivar،Khosrow Jafarpur ,Effect of external constraint on buckling of welded thin shells ,Tehran International Congress on Manufacturing TICME2007 ,
Hamid Sharifi،Mohammad Kadivar ,A new versatile two dimensional mesh generation ,Third int. Conference on advances in numerical methods eng. theory and application ,
FirstName And Last Name
Project Name
Degree
download-thesis
def-date
Darvish Ahmadi
Seismic Behavior of Double Deck Floating Roofs of Tanks Including Tube and Foam Seals
Ph.D
1401/04/11
gholam reza alvand
شبیه سازی فرآیند پخت تایر با استفاده از روش احجام محدود
M.S
1377/08/01
javad asadi zeydabadi
Study of Residual Stress in Welding of Dissimilar Carbon and Austenitic Stainless Steel Pipes
M.S
1387/06/30
Masoud Bahranifard
The analysis & optimization of stitched sandwich composite stractures with foam core subjected to impact load
M.S
1390/11/15
sajad davoodi
Thermal buckling of functionally graded plates considering different models of elastic foundation
M.S
1392/07/10
maryam fotouhi
EFFECT OF LAYERS NUMBER ON MAXIMUM HOOP STRESS IN MULTILAYER PRESSURE VESSEL
M.S
1393/04/07
Seyed Ehsan Habibi
Analysis of mechanical properties of nanomaterial solids and designing a methodology to predict their behavior
Ph.D
1390/04/15
yaser Hedayatnia
INVESTIGATION OF THE EFFECT OF STACKING SEQUENCE ON TORSIONAL BUCKLING LOAD OF THIN WALLED CYLINDERS
M.S
zeinab hooshyar
VIBRATION ANALYSIS OF COMPOSITE PIPE CONTAINING FLOWING FLUID
M.S
1388/06/17
adib khalili
ANALYSIS OF CURVATURE IN LAMINATED COMPOSITES UNDER THERMAL STRESSES AND IT`S APPLICATION IN CURING PROCESS OF ASYMMETRIC LAMINATED PLATES
M.S
1388/06/31
nafiseh khoda-yari
Nonlinear vibration of functionally graded magneto electro elastic shallow shells on elastic foundation using higher order shear deformation theory
Ph.D
mohammad mohammadi fesharaki
Progressive Damage Analysis of Composite Materials Joints
M.S
1390/06/30
Hassan Mohammadi
Vibration analysis of stepped laminated composite beams,considering bending-torsion coupling effect
M.S
1390/09/28
Yousof Mohandes
Numerical Investigation of Failure in Stitched NCF Composites Under Normal Ballistic Impact
M.S
1392/07/02
Arash Nasrollahi
Analysis of Industrial Low & High Density Poly Ethylene Tanks Suitable for South Iran's Condition
M.S
1390/12/23
salim pirani
Thermal buckling load optimaization of Laminated Skew Plates Using Genetic Algorithm
M.S
1390/06/30
Seyed Hossein Razi Mousavi
Transient Analysis of Thermo-Mechanical Double Autofrettage in Thick Walled Cylinders with Plastic Flow Dependency on Strain and Temperature for Functionally Graded Materials
Ph.D
1397/06/31
kamal sadeghi
Vibration Analysis of Composite Plates Under Tension Considering Curvature due to their Wrapping around Roller
M.S
1390/12/15
mehdi sepasdar
Numerical Analysis of Buried Pipeline Response Subjected To Oblique Fault
M.S
1389/12/01
maziyar vesal shirazi
Investigation of interlaminar 3-D stresses in mechanically fastened joints in laminated composite materials
M.S
1390/06/31
Vahid Yavari
تحلیل رفتار و بررسی شکست در اتصالات مکانیکی کامپوزیت های پیشرفته چند راستا به کمک روش المان محدود اماری
Ph.D
1391/07/01
hamed zakerhaghighi
MODELING OF DELAMINATION GROWTH IN LAMINATED COMPOSITES UNDER THE INPLANE LOADS AND INVESTIGATION OF ITS EFFECT ON CRITICAL BUCKLING LOAD USING FINITE ELEMENT METHOD
M.S
1386/06/31
Yaser Zakeri
Design of cellular materials with maximum stiffness and minimum thermal expansion coefficients using topology optimization
M.S
1394/03/03
Investigation of Welding Buckling Distortion in Thin Plates
M.S
1385/01/30
STABILITY ANALYSIS OF SINGEL-LAYER LATTICED-DOME
M.S
1387/06/20
INVESTIGATION AND DESIGN OF CYLINDRICAL RUBBER VIBRATION ISOLATORS
M.S
1383/01/01
Thermal Stresses Distribution in Thick Walled Laminated Composite Cylinders
M.S
1386/11/24
STACKING SEQUENCE OPTIMIZATION OF LAMINATED COMPOSITES BASED ON THERMAL BUCKLING USING GENETIC ALGORITHM
M.S
1385/05/01
WEIGHT OPTIMIZATION OF LAMINATED SANDWICH STRUCTURES (EXTENDED CORE & HONEYCOMB) UNDER OUT-OF-PLANE PRESSURE USING GENETIC ALGORITHM
M.S
1384/03/16
The Vibration Analysis of Power Transmission System in Hovercraft
M.S
1382/06/30
PREDICTION OF THERMAL STRESS ON EXTERNAL TANK ROOF
M.S
1387/10/14
A THEORETICAL INVESTIGATION OF STRESS ANALYSIS AND STIFFNESS COEFFICIENTS FOR PRESSURE VESSELS AND STORAGE TANKS SHELL STRUCTURE AT NOZZLE CONNECTION
M.S
1384/07/01
Achieving Proper Vibrational Pattern and Simulation of 3D Suspension Systems by Considering Various Isolators
M.S
1385/09/15
DYNAMIC ANALYSIS OF MODERATELY THICK LAMINATED COMPOSITE CIRCULAR CYLINDRICAL SHELL WITH VARIABLE THICKNESS UNDER THE ACTION OFMOVING INTERNAL VARIABLE PRESSURE
Ph.D
1385/04/01
STRESS ANALYSIS OF ADHESIVE JOINTS IN COMPOSITE STRUCTURES
M.S
1383/09/08
Evaluating 3D Welding Effect on the Thick and Thin Shells and Analysis of Welding Sequence on Stability , Distortion and Residual Stresses
Ph.D
1387/03/25
STUDY OF BUCKLING IN STORAGE TANK
M.S
1383/06/29
Finding Natural Frequencies of a Thick Orthotropic Rectangular Composite Plate Using a Hexamodal Rayleigh Formulation
M.S
1382/08/01
THE STUDY OF BEHAVIOUR AND OPTIMIZATION OF SANDWICH COMPOSITE STRUCTURES SUBJECTED TO IMPACT LOAD
M.S
1385/12/20
Fatigue Analysis of Vertical Pressure Vessels Under Cyclic Loadings
M.S
1381/06/31
Completely Nonlinear Hunting of Conventional and Steering Railway Trucks
Ph.D
1385/02/20
Study of Thick Plate Structures with Multi-Pass Welds to Improve the Final Distortion of Weldments
Ph.D
1381/09/01
ANALYSIS OF ACROSS-WIND VIBRATIONS OF TALL CYLINDRICAL STRUCTURES DUE TO VORTEX SHEDDING
M.S
1382/08/01
Saddle Design & Stress Analysis of Pressure Vessels on Two Saddles with Computer Program
M.S
1382/11/01
The Effect of Contact Area Interaction on 3-D Behavior of Mechanically Fastened Joints in Laminated Composite Materials
M.S
1386/06/31
masoud alipourlory
Modelling of Friction Stir Welding and Investigating the Role of Effective Parameters on Thermo mechanical Behavior of Welded Parts
M.S
1390/12/23
Farid Behnamianfar
Investigation on Modeling of Beam with Breathing Crack by Functionally Graded Material
M.S
1394/12/10
iman ebrahimi
Investigation of Crack Geometry in Nano-plates by Molecular Dynamics
M.S
1390/03/07
Kamran Evazpour
Modeling and Analysis of A Continuous Sheet Metal Forming Process to Make Seal Strips and Producing a Prototype
M.S
1393/12/17
farhad fakhravar
the investigation on the effect of crack on frequencies and damping by the fractional calculus
M.S
1391/12/16
Mojtaba firouzi
Optimization of multilayer beams and plates made from nano-composites using mechanical properties obtained from test of specimens making in laboratory
M.S
1390/06/30
mohsen jalalinia
Dynamics Analysis of Cracked Structures Using Adaptive Neuro Fuzzy Inference System and New Mass Matrix
M.S
1390/06/28
Hamid Keshavarzi
Investigation on the Influence of Adhesively Jointed Stiffeners in Buckling Load of Reinforced Laminated Composite Plates
M.S
1390/06/29
Hooman Khezri
Investigation of Steel Shear Wall in Steel Frame by Endurance Time Method
M.S
1392/07/09
Sajjad Rahmani shahraki
Thermoelastic Vibration Analysis of composite Shells reinforced with carbon-based nanoScopic structures
Ph.D
1397/11/29
hadi shamshiri bakaki
strenghening of masonry wall using steel strips subjected to in-plan loading
M.S
1391/09/11
amir reza shokrzadeh
SEISMIC VULNERABILITY OF REINFORCED CONCRETE STRUCTURES WITH STEEL PLATE SHEAR WALLS
M.S
1388/03/24
Mohammad Mohsen Toranj zar
Seismic Vulnerability Analysis of Masonry Portals
M.S
1389/06/29
Mohammad Kazem Yazdanian
Study of non-linear static analysis parameters of reinforced concrete frames, by comparison with finite element analysis
M.S
1391/03/22
behbood zaeripour
Crack Analysis In Gas Turbine Blade
M.S
1391/12/12
Stress Analysis and Optimization of Tapered Sandwich Beam with Composite Facing by Genetic Algorithm
M.S
1387/04/02
Effects of Permanent Displacements of Active Faults on the Overlaying
M.S
1385/08/13
INVESTIGATION OF PRESSURE VESSELS FATIGUE LIFE IN LINEAR ELASTIC REGION USING FINITE ELEMENT METHOD
M.S
1386/06/21
Static, Buckling and Free Lateral Vibration Analyses of
Ph.D
1387/10/01
SUPPRESSION OF HYPERSONIC AEROTHERMOELASTIC PANEL FLUTTER USING SHAPE MEMORY ALLOY
M.S
1383/06/30
Layout Optimization of Space Truss StructuresUsing Genetic Algorithm
M.S
1381/06/29
Free Vibration, Buckling, Nonlinear Bending and Delamination Buckling Analysis of Isotropic and Composite Beams and Plates by Differential Quadrature Method (DQM)
Ph.D
1382/01/01
fatemeh nikseresht
Evaluation of the implementation of radiation protection principles in diagnostic radiology and CT-scan departments of the Fars province
M.S
1398/11/27
Home
About
History
Faculty members
Achievements
Organization structure
Management
Managerial Board
Staff
Education
Graduate Students’ Affairs
Education Groups
Bylaws
Students/ Cultural
Research
Research Boards
Research Centers
Labs
Libraries
Journals
Contact Us