دانشکده
مهندسی مکانیک

درباره دانشکده

اعضای هیات علمی

محمدرحیم همتیان

محمدرحیم همتیان

محمدرحیم همتیان (EN Page)

گروه مهندسی مکانیک جامدات

اتاق: -

پست الکترونیکی:

پروفایل در گوگل اسکولار

اتاق مجازی: http://vroom.shirazu.ac.ir/hematian

کتب

محمدرحیم همتیان ,تحلیل و طراحی توسط نرم افزار ANSYS ,نوپردازان ,1386 ,978-964-975-028-6 ,
محمدرحیم همتیان ,تحلیل و طراحی توسط نرم افزار انسیس (چاپ دوم) ,نوپردازان ,1389 ,978-964-975-028-6 ,تهران ,
mohammad kojouri maneshMohammad EghtesadMohammad Rahim Hematiyan ,Vibrating Loads Identification using Inverse Acoustics ,0 ,978-3-659-23358-6 ,

مقالات

محمدرحیم همتیان ،مقایسه آزمایشگاهی میزان نیرو - فعال سازی پیچ طراحی شده با سایر پیچ های معمول در گسترش فک ،مجله دندانپزشکی دانشگاه علوم پزشکی شیراز ،شماره 0 ،0 ،صفحات 49 تا 0 ،
محمد امین نعمت اللهی،سیدعلی اکبر صفوی،محمد علی حاج عباسی،محمدرحیم همتیان ،حل سینماتیک وارون روبات های فرا فزونه ای با استفاده از شبکه عصبی موجکی ،مجلة مهندسی برق دانشگاه تبریز ،شماره 0 ،1389 ،صفحات 57 تا 68 ،
سیدعلی اکبر صفوی،محمدرحیم همتیان ،Inverse Kinematics Solution of Hyper-Redundant Robot Manipulators Using Wavelet-Based Neural Network ،Journal of Electrical Eng ،شماره 0 ،2010 ،صفحات 57 تا 68 ،
راضیه ایزدی،محمدرحیم همتیان ،یک روش معکوس برای تعیین ثابتهای الاستیک مواد اورتوتروپیک، مونو کلینیک و غیر همسانگرد سه بعدی ،مجله مهندسی مکانیک مدرس ،شماره 0 ،1394 ،صفحات 367 تا 376 ،
محمد امین نعمت اللهی،سیدعلی اکبر صفوی،محمدرحیم همتیان،محمد علی حاج عباسی ،حل سینماتیک وارون روبات های فرافزونه ای با استفاده از شبکه عصبی موجکی ،مجله مهندسی برق دانشگاه تبریز ،شماره 0 ،1388 ،صفحات 58 تا 68 ،
مجید عابدی،محمدرحیم همتیان،امید سروی غیاث ابادی ،شناسایی ضرایب سفتی و میرایی تکیه گاه تیرها ،مکانیک سازه ها و شاره ها ،شماره 0 ،1395 ،صفحات 43 تا 60 ،
زهرا کاظمی،محمدرحیم همتیان ،بهینه سازی فرکانس طبیعی سازه های دو و سه بعدی خرپا به روش تحلیل حساسیت گسسته ،مکانیک سازه ها و شاره ها ،شماره 0 ،1395 ،صفحات 23 تا 40 ،
مایده حاج هاشم خانی،محمدرحیم همتیان ،شناسایی شرایط مرزی در مسائل تغییر فرم مواد هایپرالاستیک Boundary Conditions Identification in Problems of Hyper-Elastic Materials Deformation ،Amirkabir Journal of Mechanical Engineering ،شماره 0 ،1396 ،صفحات 261 تا 268 ،
مجتبی فیروزی،عباس نیک نژاد،محمدرحیم همتیان،سیما ضیائی ،تحلیل تجربی، عددی و تئوری فرآیند جذب انرژی پروفیل آلومینیومی با سطح مقطع جدارنازک H شکل ،مجله مهندسی مکانیک مدرس ،شماره 0 ،1396 ،صفحات 213 تا 223 ،
عبدالرحمان حقیقی،محمدرحیم همتیان ،بهینه سازی سطح مقطع میله های توخالی تحت پیچش با استفاده از روش جوابهای اساسی ،مهندسی مکانیک مدرس ،شماره 0 ،1396 ،صفحات 269 تا 276 ،
Mohammad Rahim HematiyanLiviu Marin ,Boundary element analysis of nonlinear transient heat conduction problems involving non-homogenous and nonlinear ,Engineering Analysis with Boundary Elements ,vol. 0 ,2010 ,pp. 655-665 ,
Amir KhosravifardMohammad Rahim Hematiyan ,A new method for meshless integration in 2D and 3D Galerkin meshfree methods ,Engineering Analysis with Boundary Elements ,vol. 0 ,2010 ,pp. 30-40 ,
Mohammad Rahim Hematiyan ,CLOSED-FORM APPROXIMATE FORMULAS FOR TORSIONAL ANALYSIS OF HOLLOW TUBES WITH STRAIGHT AND CIRCULAR EDGES ,Journal of Mechanics ,vol. 0 ,2009 ,pp. 401-409 ,
Mojtaba Kazemi MirakiMohammad Rahim Hematiyan ,An Efficient Inverse Method for Identification of the Location and Time History of an Elastic Impact Load ,Journal of Testing and Evaluation ,vol. 0 ,2009 ,pp. 545-555 ,
Mohammad Rahim Hematiyan ,In vitro evaluation of force-expansion characteristics in a newly designed orthodontic expansion screw compared to ,Indian J Dent Res ,vol. 0 ,2009 ,pp. 437-441 ,
Mohammad Rahim Hematiyan ,Torsion of moderately thick hollow tubes with polygonal shapes ,Mechanics Research Communications ,vol. 0 ,2007 ,pp. 528-537 ,
Mohammad Rahim Hematiyan ,Exact transformation of a wide variety of domain integrals into boundary integrals in boundary element method ,Communications in Numerical Methods in Engineering ,vol. 0 ,2007 ,pp. 1-10 ,
Mohammad Rahim Hematiyan ,A general method for evaluation of 2D and 3D domain integrals without domain discretization and its application in BEM ,Computational Mechanics ,vol. 0 ,2007 ,pp. 509-0 ,
Mohammad Rahim Hematiyan ,Torsion of functionally graded hollow tubes ,European Journal of Mechanics A/Solids ,vol. 0 ,2009 ,pp. 551-559 ,
Mohammad Rahim HematiyanM. H. Aliabadi ,Boundary element analysis of thermo-elastic problems with non-uniform heat sources ,Journal of Strain Analysis ,vol. 0 ,2010 ,pp. 605-627 ,
Mohammad Rahim Hematiyan ,Effect of MRI on the mechanical properties of stainless steel orthodontic wires ,World Journal of Orthodontics ,vol. 0 ,2010 ,pp. 72-77 ,
Mohammad Rahim Hematiyanehsan estakhrian haghighi ,Saint-Venant torsion of open-section members of uniform thickness ,Journal of Strain Analysis ,vol. 0 ,2011 ,pp. 56-66 ,
Mohammad Rahim Hematiyan M. H. Aliabadi ,Boundary element analysis of two-and three-dimensional thermo-elastic problems with various concentrated heat sources ,Journal of Strain Analysis ,vol. 0 ,2011 ,pp. 227-242 ,
Amir KhosravifardMohammad Rahim HematiyanLiviu Marin ,Nonlinear transient heat conduction analysis of functionally graded materials in the presence of heat sources using an improved meshless radial point interpolation method ,Applied Mathematical Modelling ,vol. 0 ,2011 ,pp. 4157-4174 ,
M.amin NematollahiMohammad Rahim HematiyanFarid Mehrdad ,A two-stage inverse method for the evaluation of volume fraction distributions in 2D and 3D functionally graded materials ,Journal of Mechanical Engineering Science ,vol. 0 ,2011 ,pp. 1550-1564 ,
Mohammad Rahim Hematiyan Liviu MarinAmir Khosravifard ,Boundary element analysis of uncoupled transient thermo-elastic problems with time- and space-dependent heat sources ,Applied Mathematics and Computation ,vol. 0 ,2011 ,pp. 1862-1882 ,
Amir KhosravifardMohammad Rahim Hematiyan ,Inverse Analysis of Solidification Problems Using the Mesh-Free Radial Point Interpolation Method ,CMES Computer Modeling in Engineering and Science ,vol. 0 ,2011 ,pp. 1-24 ,
Mohammad Rahim HematiyanAmir Khosravifard ,A GENERAL TECHNIQUE FOR COUPLING TWO ARBITRARY METHODS IN STRESS ANALYSIS ,International Journal of Computational Methods ,vol. 0 ,2012 ,pp. 1-15 ,
Mohammad Rahim Hematiyanehsan estakhrian haghighi ,TORSION OF FUNCTIONALLY GRADED OPEN-SECTION MEMBERS ,International Journal of Applied Mechanics ,vol. 0 ,2012 ,pp. 1-25 ,
mohammad kojouri maneshMohammad Rahim HematiyanMohammad EghtesadDan NecsulescuAbbas Rezazadeh ,Vibrating Loads Identification using Inverse Acoustics in Fluid-structure Interaction ,Advanced Materials Research ,vol. 0 ,2012 ,pp. 51-57 ,
Mohammad Rahim HematiyanKh. HajianZ. Shokoohi ,Comparison of Dental Arch Changes and Patients’ Discomforts between Newly Designed Maxillary Expansion Screw and Slow Expansion Procedures ,J Dent Shiraz Univ Med Scien ,vol. 0 ,2012 ,pp. 110-119 ,
M.amin NematollahiFarid MehrdadMohammad Rahim HematiyanA.A. Safavi ,Crack detection in beam-like structures using a wavelet based neural network ,Journal of Aerospace Engineering ,vol. 0 ,2012 ,pp. 1243-1254 ,
Mahtab Memarpour Mohammad Rahim Hematiyan ,Determination of the dental arch form in the primary dentition using a polynomial equation model Journal of Dentistry for children ,Journal of Dentistry for Children ,vol. 0 ,2012 ,pp. 136-142 ,
Mohammad Rahim HematiyanYousof Mohandes ,Autoclaving and clinical recycling Effects on mechanical properties of orthodontic wires ,Indian Journal of Dental Research ,vol. 0 ,2012 ,pp. 638-642 ,
Mojtaba SharifiJ. ArghavaniMohammad Rahim Hematiyan ,An analytical solution for optimum design of shrink-fit multi-layer compound cylinders ,International Journal of Applied Mechanics ,vol. 0 ,2012 ,pp. 1-13 ,
Mohammad Rahim HematiyanAmir KhosravifardShiah Yui ChuinC. L. Tan ,Identification of Material Parameters of Two-Dimensional Anisotropic Bodies Using an Inverse Multi-Loading Boundary Element Technique ,CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES ,vol. 0 ,2012 ,pp. 55-76 ,
T. Q. BuiAmir KhosravifardCh. ZhangMohammad Rahim Hematiyan ,Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method ,Engineering Structures ,vol. 0 ,2013 ,pp. 90-104 ,
Mohammad Rahim HematiyanAmir KhosravifardT. Q. Bui ,Efficient evaluation of weakly/strongly singular domain integrals in the BEM using a singular nodal integration method ,Engineering Analysis with Boundary Elements ,vol. 0 ,2013 ,pp. 691-698 ,
Amir KhosravifardMohammad Rahim HematiyanLuiz Wrobel ,Simultaneous control of solidus and liquidus lines in alloy solidification ,Engineering Analysis with Boundary Elements ,vol. 0 ,2013 ,pp. 211-224 ,
salar khajehpourMohammad Rahim HematiyanLiviu Marin ,A domain decomposition method for the stable analysis of inverse nonlinear transient heat conduction problems ,International Journal of Heat and Mass Transfer ,vol. 0 ,2013 ,pp. 125-134 ,
zahra shahpariMohammad Rahim Hematiyan ,Closed-form solutions for torsion analysis of structural beams considering web-flange junctions fillets ,Journal of Theoretical and Applied Mechanics ,vol. 0 ,2013 ,pp. 393-407 ,
Amir KhosravifardMohammad Rahim HematiyanLiviu Marin ,Determination of optimum cooling conditions for continuous casting by a meshless method ,Journal of Mechanical Engineering Science ,vol. 0 ,2013 ,pp. 1022-1035 ,
Y.C. ShiahMohammad Rahim HematiyanY.H. Chen ,Regularization of the Boundary Integrals in the Bem Analysis of 3D Potential Problems ,Journal of Mechanics ,vol. 0 ,2013 ,pp. 385-401 ,
Mohammad Rahim HematiyanAmir KhosravifardG.R. Liu ,A background decomposition method for domain integration in weak-form meshfree methods ,Computers and Structures ,vol. 0 ,2014 ,pp. 64-78 ,
salar khajehpourMohammad Rahim Hematiyan ,INVERSE RECONSTRUCTION OF THERMAL AND MECHANICAL BOUNDARY CONDITIONS IN COUPLED NONLINEAR THERMO-ELASTIC PROBLEMS ,International Journal of Applied Mechanics ,vol. 0 ,2014 ,pp. 1-33 ,
arghavan talebanpourMohammad Rahim Hematiyan ,TORSIONAL ANALYSIS OF PIEZOELECTRIC HOLLOW BARS ,International Journal of Applied Mechanics ,vol. 0 ,2014 ,pp. 1-18 ,
amirAbbass rastegar haghighi shiraziMohammad Rahim Hematiyan ,Closed-form formulation for torsional analysis of beams with open or closed cross sections having a crack ,Journal of Aerospace Engineering ,vol. 0 ,2013 ,pp. 1953-1967 ,
Farshad LiaghatMohammad Rahim HematiyanAmir Khosravifard ,Material tailoring in functionally graded rods under torsion ,Journal of Mechanical Engineering Science ,vol. 0 ,2014 ,pp. 3283-3295 ,
Mohammad Rahim HematiyanAmir KhosravifardYui-Chuin Shiah ,A novel inverse method for identification of 3D thermal conductivity coefficients of anisotropic media by the boundary element analysis ,International Journal of Heat and Mass Transfer ,vol. 0 ,2015 ,pp. 685-693 ,
Arash OmidvariMohammad Rahim Hematiyan ,Approximate Closed-form Formulae for Buckling Analysis of Rectangular Tubes under Torsion ,International Journal of Engineering ,vol. 0 ,2015 ,pp. 1226-1232 ,
mohammad amin nematollahiMohammad Rahim HematiyanFarid Mehrdad ,A two-stage inverse method for the evaluation of volume fraction distributions in 2D and 3D functionally graded material ,Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science ,vol. 0 ,2011 ,pp. 1550-1564 ,
mohammad amin nematollahiFarid MehrdadMohammad Rahim Hematiyan ,Crack detection in beam-like structures using a wavelet-based neural network ,Proceedings of the Institution of Mechanical Engineers Part G Journal of Mechanical Engineering Science ,vol. 0 ,2012 ,pp. 1243-1254 ,
parvin mahammadyariReza FaghihiMohammad Amin Mosleh-ShiraziMehrzad LotfiMohammad Rahim Hematiyancraig koontsAli Miegooni ,Calculation of dose distribution in compressible breast tissues using finite element modeling Monte Carlo simulation and thermoluminescence dosimeters ,physics in medicine and biology ,vol. 0 ,2015 ,pp. 9185-9202 ,
ghazal mehdizadehMohammad Rahim HematiyanMohammad Rahim Nami ,Non-uniform torsion of open-section members considering cross-section curvatures ,The Journal of Strain Analysis for Engineering Design ,vol. 0 ,2016 ,pp. 444-458 ,
Reza VaghefiMohammad Rahim HematiyanAli Nayebi ,Three-dimensional thermo-elastoplastic analysis of thick functionally graded plates using the meshless local Petrov–Galerkin method ,Engineering Analysis with Boundary Elements ,vol. 0 ,2016 ,pp. 34-49 ,
Amir KhosravifardMohammad Rahim Hematiyan ,Meshless Analysis of Casting Process Considering Non-Fourier Heat Transfer ,Iranian Journal of Materials Forming ,vol. 0 ,2016 ,pp. 13-25 ,
Mohammad Rahim HematiyanAmir Khosravifard ,Boundary element analysis of 2D and 3D thermoelasticproblems containing curved line heat sources ,European Journal of Computational Mechanics ,vol. 0 ,2016 ,pp. 147-164 ,
maedeh hajhashemkhaniMohammad Rahim Hematiyan ,Determination of material parameters of isotropic and anisotropic hyper-elastic materials using boundary measured data ,Journal of theoretical and applied mechanics ,vol. 0 ,2015 ,pp. 895-910 ,
Amir KhosravifardMohammad Rahim HematiyanT.Q. BuiT.V. Do ,Accurate and efficient analysis of stationary and propagating crack problems by meshless methods ,Theoretical and Applied Fracture Mechanics ,vol. 0 ,2017 ,pp. 21-34 ,
Zahra KazemiMohammad Rahim HematiyanReza Vaghefi ,Meshfree radial point interpolation method for analysis of viscoplastic problems ,Engineering Analysis with Boundary Elements ,vol. 0 ,2017 ,pp. 172-184 ,
Fatemeh TaheriMohammad Rahim Hematiyan ,Torsional analysis of hollow members with sandwich wall ,Journal of Sandwich Structures & Materials ,vol. 0 ,2017 ,pp. 317-347 ,
Mohammad Rahim HematiyanAmir KhosravifardYui-Chuin Shiah ,A new stable inverse method for identification of the elastic constants of a three-dimensional generally anisotropic solid ,International Journal of Solids and Structures ,vol. 0 ,2017 ,pp. 240-250 ,
Reza VaghefiAli NayebiMohammad Rahim HematiyanAmir Khosravifard ,Investigating the effects of mushy zone thickness on residual stresses in alloy solidification ,Meccanica ,vol. 0 ,2018 ,pp. 905-922 ,
Tan-Van VuNgoc-Hung NguyenAmir KhosravifardMohammad Rahim HematiyanSatoyuki TanakaT.Q. Bui ,A simple FSDT-based meshfree method for analysis of functionally graded plates ,Engineering Analysis with Boundary Elements ,vol. 0 ,2017 ,pp. 1-12 ,
Mojtaba SharifiMohammad Rahim HematiyanJ. Arghavani ,OPTIMUM ARRANGEMENT OF LAYERS IN MULTI-LAYER COMPOUND CYLINDERS ,International Journal of Applied Mechanics ,vol. 0 ,2014 ,pp. 1450057-0 ,
Reza VaghefiMohammad Rahim HematiyanAli NayebiAmir Khosravifard ,A parametric study of the MLPG method for thermo-mechanical solidification analysis ,Engineering Analysis with Boundary Elements ,vol. 0 ,2018 ,pp. 10-24 ,
Zahra KazemiMohammad Rahim HematiyanY.C. Shiah ,An efficient load identification for viscoplastic materials by an inverse meshfree analysis ,International Journal of Mechanical Sciences ,vol. 0 ,2018 ,pp. 303-312 ,
Maedeh HajhashemkhaniMohammad Rahim HematiyanSevan Goenezen ,Identification of Material Parameters of a Hyper-Elastic Body With Unknown Boundary Conditions ,Journal of Applied Mechanics ,vol. 0 ,2018 ,pp. 51006-0 ,
Y. MeiB. StoverNazanin Afsar Kazeroni Maedeh HajhashemkhaniMohammad Rahim HematiyanSevan Goenezen ,A comparative study of two constitutive models within an inverse approach to determine the spatial stiffness distribution in soft materials ,International Journal of Mechanical Sciences ,vol. 0 ,2018 ,pp. 446-454 ,
Y.C. ShiahN.A. TuanMohammad Rahim Hematiyan ,Direct transformation of the volume integral in the boundary integral equation for treating three-dimensional steady-state anisotropic thermoelasticity involving volume heat source ,International Journal of Solids and Structures ,vol. 0 ,2018 ,pp. 287-297 ,
Mojtaba firouziAbbas Niknejadsima ziaeeMohammad Rahim Hematiyan ,Optimization of H-shaped thin-walled energy absorber by Taguchi method and a new theoretical estimation for its energy absorption ,Thin-Walled Structures ,vol. 0 ,2018 ,pp. 33-44 ,
Zahra KazemiMohammad Rahim Hematiyan ,Inverse Determination of Time Dependent Loads in Viscoplastic Deformations Using Strain Measurements in the Deformed Configuration ,International Journal of Applied Mechanics ,vol. 0 ,2018 ,pp. 1850057-0 ,
Mohammad Rahim Hematiyan Amir Khosravifard ,A Two-Constraint Method for Appropriate Determination of the Configuration of Source and Collocation Points in theMethod of Fundamental Solutions for 2D Laplace Equation ,Advances in Applied Mathematics and Mechanics ,vol. 0 ,2018 ,pp. 554-580 ,
Tan-Van VuAmir KhosravifardMohammad Rahim HematiyanT. Q. Bui ,A new refined simple TSDT-based effective meshfree method for analysis of through-thickness FG plates ,Applied Mathematical Modelling ,vol. 0 ,2018 ,pp. 514-534 ,
Reza VaghefiMohammad Rahim HematiyanAli Nayebi ,Three-dimensional thermo-mechanical analysis of continuous casting and comparison with two-dimensional models ,The Journal of Strain Analysis for Engineering Design ,vol. 0 ,2018 ,pp. 421-434 ,
Maedeh HajhashemkhaniMohammad Rahim HematiyanSevan Goenezen ,Inverse determination of elastic constants of a hyper-elastic member with inclusions using simple displacement/length measurements ,The Journal of Strain Analysis for Engineering Design ,vol. 0 ,2018 ,pp. 529-542 ,
Tan-Van VuAmir KhosravifardMohammad Rahim HematiyanT. Q. Bui ,Enhanced meshfree method with new correlation functions for functionally graded plates using a refined inverse sin shear deformation plate theory ,European Journal of Mechanics - A/Solids ,vol. 0 ,2019 ,pp. 160-175 ,
Y.C. ShiahMohammad Rahim Hematiyan ,Interlaminar Stresses Analysis of Three-Dimensional Composite Laminates by the Boundary Element Method ,Journal of Mechanics ,vol. 0 ,2018 ,pp. 829-837 ,
Zahra KazemiMohammad Rahim HematiyanYui-Chuin Shiah ,Load Identification for Viscoplastic Materials with Some Unknown Material Parameters ,International Journal of Mechanical Sciences ,vol. 0 ,2019 ,pp. 164-177 ,
Reza VaghefiAli NayebiMohammad Rahim Hematiyan ,Investigating the effects of cooling rate and casting speed on continuous casting process using a 3D thermo-mechanical meshless approach ,Acta Mechanica ,vol. 0 ,2018 ,pp. 4375-4392 ,
Maedeh HajhashemkhaniMohammad Rahim HematiyanSevan Goenezen ,Identification of hyper-viscoelastic material parameters of a soft member connected to another unidentified member by applying a dynamic load ,International Journal of Solids and Structures ,vol. 0 ,2019 ,pp. 50-62 ,
Mohammad Rahim HematiyanYui-Chuin Shiah ,An efficient analysis of steady-state heat conduction involving curved line/surface heat sources in two/three-dimensional isotropic media ,Journal of Theoretical and Applied Mechanics ,vol. 0 ,2018 ,pp. 1123-0 ,
bentolhoda jamshidiMohammad Rahim HematiyanMojtaba Mahzoon ,An improved time domain meshfree method for analysis of quasi-static and dynamic inhomogeneous viscoelastic problems ,Engineering Analysis with Boundary Elements ,vol. 0 ,2019 ,pp. 59-67 ,
Amir Khosravifardseyed abas razaviMohammad Rahim Hematiyan ,An inverse meshfree method for heat flux identification based on strain measurement ,International Journal of Thermal Sciences ,vol. 0 ,2019 ,pp. 50-66 ,
Farshad LiaghatMohammad Rahim HematiyanAmir KhosravifardTimon Rabczuk ,A robust meshfree method for analysis of cohesive crack propagation problems ,Theoretical and Applied Fracture Mechanics ,vol. 0 ,2019 ,pp. 102328-0 ,
Mohammad Rahim HematiyanAmir Khosravifard ,Analysis of Two- and Three-dimensional Steady-state Thermo-mechanical Problems Including Curved Line/Surface Heat Sources Using the Method of Fundamental Solutions ,European Journal of Computational Mechanics ,vol. 0 ,2019 ,pp. 51-80 ,
Elham KhosrowpourMohammad Rahim HematiyanMaedeh Hajhashemkhani ,A strong-form meshfree method for stress analysis of hyperelastic materials ,Engineering Analysis with Boundary Elements ,vol. 0 ,2019 ,pp. 32-42 ,
Fazel DaraMohammad KadivarHassan ZohoorMohammad Rahim HematiyanFarid Mehrdad ,Failure Procedure in Adhesive Composite Joints under Different Types of Loading ,Journal Of Applied And Computational Mechanics ,vol. 0 ,2019 ,pp. 647-651 ,
bentolhoda jamshidiMohammad Rahim HematiyanMojtaba MahzoonYui-Chuin Shiah ,Load identification for a viscoelastic solid by an accurate meshfree sensitivity analysis ,Engineering Structures ,vol. 0 ,2020 ,pp. 109895-0 ,
Mohammad Rahim HematiyanMorteza ArezouNegar Koochak dezfoulimarjan khoshroo ,Some Remarks on the Method of Fundamental Solutions for Two-Dimensional Elasticity ,Computer Modeling in Engineering & Sciences ,vol. 0 ,2019 ,pp. 661-686 ,
Amir KhosravifardMohammad Rahim HematiyanNarges Ghiasi ,A meshfree method with dynamic node reconfiguration for analysis of thermo-elastic problems with moving concentrated heat sources ,Applied Mathematical Modelling ,vol. 0 ,2020 ,pp. 624-638 ,
Yui-Chuin ShiahN.A. TuanMohammad Rahim Hematiyan ,Thermal Stress Analysis of 3D Anisotropic Materials Involving Domain Heat Source by the Boundary Element Method ,Journal of Mechanics ,vol. 0 ,2019 ,pp. 839-850 ,
marjan khoshrooMohammad Rahim HematiyanYousef Daneshbod ,Two-dimensional elastodynamic and free vibration analysis by the method of fundamental solutions ,Engineering Analysis with Boundary Elements ,vol. 0 ,2020 ,pp. 188-201 ,
nima dadarMohammad Rahim HematiyanAmir KhosravifardYui-Chuin Shiah ,An inverse meshfree thermoelastic analysis for identification of temperature-dependent thermal and mechanical material properties ,Journal of Thermal Stresses ,vol. 0 ,2020 ,pp. 1165-1188 ,
Maedeh HajhashemkhaniMohammad Rahim Hematiyan ,Inflation extension and torsion analysis of compressible functionally graded hyperelastic tubes ,Acta Mechanica ,vol. 0 ,2020 ,pp. 3947-3960 ,
Maedeh HajhashemkhaniMohammad Rahim HematiyanElham KhosrowpourSevan Goenezen ,A novel method for the identification of the unloaded configuration of a deformed hyperelastic body ,Inverse Problems in Science and Engineering ,vol. 0 ,2020 ,pp. 1493-1512 ,
Sevan Goenezen Mohammad Rahim Hematiyan ,Mechanics Based Tomography (MBT) Validation using experimental data ,Journal of the Mechanics and Physics of Solids ,vol. 0 ,2021 ,pp. 104187-0 ,
Maedeh HajhashemkhaniMohammad Rahim Hematiyan ,The identification of the unloaded configuration of breast tissue with unknown non-homogenous stiffness parameters using surface measured data in deformed configuration ,Computers in Biology and Medicine ,vol. 0 ,2021 ,pp. 104107-0 ,
Yui-Chuin ShiahُShengChi HuangMohammad Rahim Hematiyan ,Efficient 2D Analysis Of Interfacial Thermoelastic Stresses in Multiply Bonded Anisotropic Composites With Thin Adhesives ,Computers Materials & Continua ,vol. 0 ,2020 ,pp. 701-727 ,
Mehrdad MohammadiMohammad Rahim Hematiyan ,Analysis of transient uncoupled thermoelastic problems involving moving point heat sources using the method of fundamental solutions ,Engineering Analysis with Boundary Elements ,vol. 0 ,2021 ,pp. 122-132 ,
Yui-Chuin ShiahRay-Yu ChangMohammad Rahim Hematiyan ,Three-dimensional analysis of heat conduction in anisotropic composites with thin adhesive/interstitial media by the boundary element method ,Engineering Analysis with Boundary Elements ,vol. 0 ,2021 ,pp. 36-47 ,
Negar Koochak dezfouliMohammad Rahim HematiyanMehrdad Mohammadi ,A modification of the method of fundamental solutions for solving 2D problems with concave and complicated domains ,ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS ,vol. 0 ,2021 ,pp. 168-181 ,
Farshad LiaghatAmir KhosravifardMohammad Rahim HematiyanTimon Rabczuk ,An inverse procedure for identification of loads applied to a fractured component using a mehfree method ,International Journal for Numerical Methods in Engineering ,vol. 0 ,2021 ,pp. 1687-1705 ,
Mohammad Rahim HematiyanMehrdad MohammadiChia Cheng Tsai ,The method of fundamental solutions for anisotropic thermoelastic problems ,Applied Mathematical Modelling ,vol. 0 ,2021 ,pp. 200-218 ,
Saeideh HamidiAmir KhosravifardMohammad Rahim HematiyanJavad Dehghani ,A comparative mechanical study of two types of femur bone implant using the finite element method ,International Journal for Numerical Methods in Biomedical Engineering ,vol. 0 ,2021 ,pp. 0-0 ,

همایش ها

احسان راستی،محمدرحیم همتیان،خسرو جعفرپور ,تحلیل انتقال حرارت شمشهای فولادی در کوره حرارتی نورد ,نهمین کنفرانس مهندسی ساخت و تولید ایران ,1388 ,دانشگاه بیرجند ,
احسان راستی،خسرو جعفرپور،محمدرحیم همتیان ,بررسی بهینه سازی فرآیند گرمایشی شمشهای فولادی در کوره حرارتی نورد ,هفدهمین کنفرانس سالانه (بین المللی) مهندسی مکانیک ISME2009 ,1388 ,تهران ,
احسان استخریان‌حقیقی،محمدرحیم همتیان ,یک روش جدید برای تحلیل پیچش میله های با مقطع باز ,هیجدهمین همایش سالانه بی نالمللی مهندسی مکانیک ایران ISME 2010 ,1389 ,تهران ,
محمدرحیم همتیان ,تخمین بارهای آیرودینامیکی واردشونده به سازه های هوایی بوسیله اندازه گیری کرنش ,نخستین همایش تخصصی سازه های هوافضایی و سیستمهای جدایش ,1385 ,ایران-تهران ,
محمدرحیم همتیان ,کوپل غیر خطی روشهای اجزاء محدود و اجزاء مرزی برای تحلیل سازه ها ,نخستین همایش تخصصی سازه های هوافضایی و سیستمهای جدایش ,1385 ,ایران-تهران ,
محمدرحیم همتیان ,فرمولهای تقریبی برای تحلیل پیچش اعضای میله ای با مقطع مثلثی ,هفتمین همایش سالانه (بین المللی) انجمن مهندسی هوا فضای ایران ,1386 ,ایران-تهران ,
محمدرحیم همتیان ,روش کوپل اجزاء محدود و اجزاء مرزی برای تحلیل سازه ها ,ششمین کنفرانس سراسری انجمن هوافضای ایران ,1385 ,ایران-تهران ,
محمدرحیم همتیان ,مدل سازی مجموعه اتصالات پیچ و پرچ در سازه ها ,همایش تخصصی سازه های هوافضایی ,1385 ,ایران-تهران ,
محمدرحیم همتیان ,تحلیل معکوس انجماد دو بعدی با استفاده از روش اجزاء محدود ,کنفرانس ملی مهندسی ساخت و تولید ,1386 ,ایران-نجف آباد ,
محمدرحیم همتیان ,محاسبه معکوس بارهای اعمالی به ورقهای کامپوزیتی با رفتار غیر خطی ,پانزدهمین کنفرانس سالانه (بین المللی) مهندسی مکانیک ISME2007 ,1386 ,ایران-تهران ,
محمدرحیم همتیان ,محاسبه انتگرالهای دامنه ای دو بعدی و سه بعدی بدون المان داخلی جهت استفاده د روش اجزاء مرزی و دیگر روشهای بدون المان ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,1387 ,ایران-کرمان ,
محمدرحیم همتیان ,شناسایی ترک با اندازه گیری فرکانسهای طبیعی و به کمک شبکه های عصبی ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,1387 ,ایران-کرمان ,
محمدرحیم همتیان ,بررسی میزان تأثیر روش کیسه خلاً بر خواص فیزیکی و مکانیکی قطعات کامپوزیتی ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,1387 ,ایران-کرمان ,
محمدرحیم همتیان ,پیچش میله های تو خالی با سطح مقطع دلخواه متشکل از قطعات مستقیم و کمانهای دایره ای ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,1387 ,ایران-کرمان ,
محمدرحیم همتیان ,تعیین شار در مسائل معکوس ترموالاستیسیته با استفاده همزمان از مقادیر اندازه گیری دما و کرنش ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,1387 ,ایران-کرمان ,
محمدرحیم همتیان ,تحلیل اجزاء مرزی مسائل ترموالاستیسیته بدون تقسیم بندی دامنه ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,1387 ,ایران-کرمان ,
محمدرحیم همتیان،عبدالجواد جعفرپور ,تحلیل انتقال حرارت شمشهای فو لادی در کوره حرارتی نورد ,نهمین کنفرانس مهندسی ساخت و تولید ایران ,1387 ,ایران-بیرجند ,
محمدرحیم همتیان ,An inverse method for fast identification of impact loads using strain integrals ,
محمدرحیم همتیان ,تحلیل پیچش مقاطع باز دارای ترک ,ISME بیستمین همایش سالانه بین المللی مهندسی مکانیک ایران، 2012 ,1391 ,شیراز، ایران ,
احسان راستی،محمدرحیم همتیان،خسرو جعفرپور ,تحلیل انتقال حرارت شمش فولادی در کوره حرارتی نورد ,نهمین کنفرانس مهندسی ساخت و تولید ایران ,1387 ,بیرجند ,
محمدامین سپاس خواه،محمدرحیم همتیان،سیدمحسن دمادم ,شناسائی توزیع نسبت حجمی در یک سیلندر مدرج تابعی توسط اندازه گیریهای الاستیک و ارتعاشاتی ,بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران ISME 2014 ,1393 ,اهواز ,
زهرا کاظمی،محمدرحیم همتیان ,بهینه سازی فرکانس طبیعی سازه های خرپا به روش تحلیل حساسیت گسسته ,سومین کنفرانس بین المللی اکوستکیک و ارتعاشات ,1392 ,تهران ,
مایده حاج هاشم خانی،محمدرحیم همتیان ,شناسایی شرایط مرزی در مساله تغییر فرم هایپرالاستیک ,بیست و سومین همایش سالانه بین المللی مهندسی مکانیک ایران ISME 2015 ,1394 ,تهران، ایران ,
محمد امین نعمت اللهی،محمدرحیم همتیان،مریم معین فر،سیده زهرا شهپری ,شناسایی ترک با اندازه گیری فرکانس های طبیعی و به کمک شبکه های عصبی ,شانزدهمین کنفرانس بین المللی مهندسی مکانیک ,1387 ,دانشگاه شهید باهنر کرمان ,
محمد امین نعمت اللهی،محمدرحیم همتیان،مهرداد فرید ,تشخیص ترک در تیرهای با خواص تابعی به کمک تحلیل ارتعاشی و شبکه عصبی موجکی ,بیست و چهارمین همایش سالانه بین المللی مهندسی مکانیک ایران ,1395 ,دانشگاه یزد ,
نیما دادار،محمدرحیم همتیان ,شناسایی خواص حرارتی وابسته به دما به کمک یک روش معکوس بدون المان ,بیست و هشتمین همایش سالانه بین¬المللی مهندسی مکانیک ایران، ISME2020 ,1399 ,تهران ,
Mohammad Rahim Hematiyan ,A general method for coupling of analytical boundary element and other numerical methods with each other ,10th Int. Conference on Boundary Element Techniques ,
Helnaz SoltaniMohammad Rahim HematiyanKhosrow Jafarpur ,A METHOD FOR THERMAL LOADING DESIGN TO REDUCE STRESSES ,ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010 ,
Mohammad Rahim Hematiyan ,The singular nodal integration method for evaluation of domain integrals in the BEM ,11th Int. Conference on Boundary Element and Meshless Techniques ,
Mohammad Rahim Hematiyan ,Nonlinear transient thermo-mechanical analysis of functionally graded materials by an improved meshless radial point interpolation method ,11th Int. Conference on Boundary Element and Meshless Techniques ,
Mohammad Rahim HematiyanLiviu Marin ,Boundary element analysis of uncoupled transient thermo-elasticity involving non-uniform heat sources ,11th Int. Conference on Boundary Element and Meshless Techniques ,
Mohammad Rahim Hematiyan ,A comparative study of a New Designed Expansion Screw ,5th International congress of the Iranian Association of Orthodontists ,
Mohammad Rahim Hematiyan ,Torsion of functionally graded hollow tubes of polygonal shape ,7th Iranian Aerospace Society Conference ,
Mohammad Rahim Hematiyan ,Inverse estimation of heat flux by strain measurement in transient thermoelasticity ,The Seventh International Congress on Thermal Stresses TS2007 ,
Mohammad Rahim Hematiyan ,Exact transformation of domain integrals into boundary integrals in BEM formulation of 2D and 3D thermoelasticity ,8th International Conference on Boundary Element Techniques BETEQ 2007 ,
Mohammad Rahim Hematiyan ,Torsion of functionally graded hollow tubes of arbitrary shape ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,
Mohammad Rahim Hematiyan ,A truly meshless element free Galerkin method by a general approach for evaluation of domain integrals ,شانزدهمین کنفرانس سالانه مهندسی مکانیک ایران ISME 2008 ,
Mohammad Rahim Hematiyan ,Cartesian transformation method for evaluation of regular and singular domain integrals in boundary element and other mehs reduction methods ,9th Int. Conference on Boundary Element Techniques - BeTeq 2009 ,
Mohammad Rahim Hematiyan ,An efficient method for boundary element analysis of thermoelastic problems without domain discretization ,9th Int. Conference on Boundary Element Techniques - BeTeq 2009 ,
Mohammad Rahim Hematiyan ,Infinite boundary element formulation for the analysis of half-space problems ,The 4th National Conference on Civil Engineering ,
Mohammad Rahim HematiyanMehdi Kasraee ,INFINITE BOUNDARY ELEMENT FORMULATION FOR THE ANALYSIS OF HALF- SPACE PROBLEMS ,THE 4th NATIONAL CONFERENCE ON CIVIL ENGINEERING ,
Mohammad Rahim Hematiyan ,An efficient method for dynamic load identification based on structural response ,EngOpt 2008 - International Conference on Engineering Optimization ,
Seyyed Arash HaghpanahMohammad EghtesadMohammad Rahim HematiyanAlireza Khayatian ,Adaptive Backstepping Stabilization of Uncertain Switched Nonlinear Systems in Parametric Strict-Feedback Form ,ASME International Mechanical Engineering Congress and Exhibition (IMECE) ,
mohammad kojouri maneshMohammad Rahim HematiyanMohammad EghtesadDan NecsulescuAbbas Rezazadeh ,Vibrating Loads Identification using Inverse Acoustics in Fluid-Structure Interaction ,2011 International Conference on Mechanical and Aerospace Engineering ,
Seyed Amir KhosravifardMohammad Rahim Hematiyan ,Inverse analysis of solidification problems using the mesh-free radial point interpolation method ,12th Int. Conf. on Boundary Element and Meshless Techniques ,
mohammad reza Soukhack lariMohammad Rahim HematiyanHelnaz Soltani ,Torsional analysis of orthotropic hollow bars ,ICAMMM 2010 ,
Helnaz SoltaniKhosrow JafarpurMohammad Rahim Hematiyanseyede zahra hosseini sarani ,Stress reduction in thick-walled cylinders under internal pressure ,ICAMMM 2010 ,
seyede zahra hosseini saraniMohammad Rahim HematiyanAli Nayebimohammad reza Soukhack lari ,Torsion analysis of hollow tubes made of nonlinear materials ,ICAMMM 2010 ,
Mohammad Rahim HematiyanSeyed Amir KhosravifardShiah Yui ChuinChoon Lai Tan ,An inverse multi-loading boundary element method for identification of elastic constants of 2D anisotropic bodies ,13th International Conference on Boundary Element and Meshless Techniques ,
Seyed Amir KhosravifardMohammad Rahim Hematiyan ,Analysis of phase-change heat conduction problems by an improved CTM-based RPIM ,13th International Conference on Boundary Element and Meshless Techniques ,
mojtaba sharifiMohammad Rahim Hematiyan ,Optimization of Three- Four- and Five-layer Shrink-fitted Compound Cylinders ,20th Annual International Conference on Mechanical Engineering-ISME2012 ,
mohammad kojouri maneshMohammad EghtesadMohammad Rahim HematiyanDan Necsulescu ,Time history of Vibrating loads Identification using Inverse Acoustics ,1st International Conference on Acoustics & Vibration (ISAV2011) ,
mohammad kojouri maneshMohammad EghtesadMohammad Rahim Hematiyan ,Identification of Unknown Vibrating Pressures in a Three-Chamber Unit Using a Computational Inverse Acoustics Method ,The 2nd International Conference on Control Instrumention and Automation ,
Seyed Amir KhosravifardMohammad Rahim Hematiyan ,Analysis of solidification involving finite heat wave speed by a meshless method ,14th Int. Conf. on Boundary Element and Meshless Techniques ,
Farshad LiaghatMohammad Rahim HematiyanSeyed Amir Khosravifard ,Material tailoring in functionally graded rods under torsion ,14th Int. Conf. on Boundary Element and Meshless Techniques ,
Farshad LiaghatMohammad Rahim Hematiyan ,سامان دهی ماده در میله های تو خالی مدرج تابعی تحت پیچش ,بیست و یکمین همایش سالانه بینالمللی مهندسی مکانیک ایران ,
M. SharifiMohammad Rahim HematiyanRoshanak Banan ,A New Analytical Solution for Optimum Design of Shrink-Fit Multi-Layer Compound Cylinders ,ASME 2012 Pressure Vessels and Piping Conference ,
Amir KhosravifardMohammad Rahim HematiyanT. Q. Bui ,A background decomposition meshfree method for evaluating fracture parameters of 2D linear cracked solids ,16th Int. Conf. on Boundary Element and Meshless Techniques ,
Mohammad Rahim Hematiyanabd alrahman haghighiAmir Khosravifard ,A method for appropriate determination of the location of sources in the method of fundamental solutions ,16th International Conference on Boundary Element and Meshless Techniques ,
Mohammad Rahim Hematiyan ,Boundary element analysis of two-dimensional thermo-elastic problems with curved line heat sources ,16th International Conference on Boundary Element and Meshless Techniques ,
Mohammad Rahim HematiyanMorteza Arezouabd alrahman haghighi ,Reducing the condition number of the coefficient matrix in the method of fundamental solutions for 2D Laplace equation ,17th International Conference on Boundary Element and Meshless Techniques ,
Amir KhosravifardSeyed abbas RazaviMohammad Rahim Hematiyan ,Identification of heat fluxes based on strain measurement and meshfree methods ,19th International Conference on Boundary Element and Meshless Techniques ,
Zahra KazemiMohammad Rahim HematiyanAmir Khosravifard ,Meshfree Analysis of Viscoplastic Problems Using Different Domain Integration Techniques ,19th International Conference on Boundary Element and Meshless Techniques ,
Mohammad Rahim Hematiyan ,The Method of Fundamental Solutions for Two-Dimensional Stationary Thermoelastic Problems Involving Curved Line Heat Sources ,19th International Conference on Boundary Element and Meshless Techniques ,

طرح های بنیادی

برگزاری کارگاه اتومکانیک برای تعداد 14 نفر در یک گروه دانشجویان مجتمع دانشگاهی علوم و فناوری هوادریا با استفاده از توان علمی دانشکده مهندسی مکانیک
برگزاری دوره آموزشی نرم افزار تخصصی ABAQUS
آنالیزهای ترمومکانیکی بر روی یک قطعه سرامیکی با در نظر گرفتن شوک حرارتی (زیر مجموعه قرارداد طرح کلان ملی)

جوایز

دانش آموخته رتبه اول دوره کارشناسی، کارشناسی ارشد و دکتری رشته مهندسی مکانیک دانشگاه شیراز ,1379
رتبه اول کشور در کنکور سراسری کارشناسی ارشد مهندسی مکانیک در گرایشهای طراحی کاربردی و تبدیل انرژی ,1371
جایزه انجمن مهندسان مکانیک ایران برای بهترین رساله دکتری ,1379
جایزه دوم جشنواره علمی خوارزمی (به همراه دکتر خیاطیان و دکتر صفوی) ,1382
استاد نمونه آموزشی دانشکده مهندسی دانشگاه شیراز ,1386
استاد نمونه پژوهشی دانشکده مهندسی مکانیک دانشگاه شیراز ,1390
استاد نمونه آموزشی دانشکده مهندسی مکانیک دانشگاه شیراز ,1392
استاد نمونه پژوهشی دانشکده مهندسی مکانیک دانشگاه شیراز ,1392
جایزه انجمن ارتعاشات و آکوستیک ایران برای استاد راهنمای بهترین پایان نامه کارشناسی ارشد (با دکتر اقتصاد) ,1392

شنبه و دوشنبه ساعت 10-11

شنبه و دوشنبه ساعت 12-13

نام درس

نام درس	کد درس	تعداد واحد	گروه درسی	زمان ارائه درس	تاریخ امتحان	ترم ارائه درس

مکانیک محیطهای پیوسته 1	320244161	3	1	هفتگی - 1 (یک شنبه - 1030 الی 1200) \| هفتگی - 3 (سه شنبه - 1030 الی 1200)	1399/10/23 (1100 - 1400)	13991
روشهای طراحی در مهندسی	320231561	2	1	هفتگی - 0 (شنبه - 1100 الی 1200) \| هفتگی - 2 (دو شنبه - 1100 الی 1200)	1399/10/16 (1400 - 1700)	13991

نمایش 2 نتیجه